![background image](http://html.mh-extra.com/html/smc-networks/2888w-m/2888w-m_owners-manual_1300139074.webp)
Initial Configuration
5-10
5. Security
(802.11g) – Set the Authentication Type to “Open
System” to allow open access without authentication, or
“Shared Key” to require authentication based on a shared key.
Enable Wired Equivalent Privacy (WEP) to encrypt data
transmissions. To configure other security features use the
Advanced Setup menu as described in Chapter 5.
Authentication Type –
Use “Open System” to allow open access
to all wireless clients without performing authentication, or
“Shared Key” to perform authentication based on a shared key
that has been distributed to all stations. (Default: Open System)
WEP
– Wired Equivalent Privacy is used to encrypt transmissions
passing between wireless clients and the access point. (Default:
Disabled)
Shared Key Setup –
If you select “Shared Key” authentication
type or enable WEP, then you also need to configure the shared
key by selecting 64-bit or 128-bit key type, and entering a
Summary of Contents for 2888W-M
