![background image](http://html.mh-extra.com/html/smc-networks/2888w-m/2888w-m_owners-manual_1300139262.webp)
Command Line Interface
7-92
Example
To specify the 10/100Base-TX network interface, enter the
following command:
dns server
This command specifies the address for the primary or secondary
domain name server to be used for name-to-address resolution.
Syntax
dns primary-server
<
server-address>
dns secondary-server
<
server-address>
•
primary-server
- Primary server used for name resolution.
•
secondary-server
- Secondary server used for name
resolution.
•
server-address
- IP address of domain-name server.
Default Setting
None
Command Mode
Global Configuration
Command Usage
The primary and secondary name servers are queried in
sequence.
Example
This example specifies two domain-name servers.
AP(config)#interface ethernet
AP(if-ethernet)#
AP(if-ethernet)#dns primary-server 192.168.1.55
AP(if-ethernet)#dns secondary-server 10.1.0.55
AP(if-ethernet)#
Summary of Contents for 2888W-M
