![background image](http://html.mh-extra.com/html/smc-networks/2888w-m/2888w-m_owners-manual_1300139168.webp)
System Configuration
6-92
Event Logs
The Event Logs window shows the log messages generated by
the wireless bridge and stored in memory.
The Event Logs table displays the following information:
•
Log Time: The time the log message was generated.
•
Event Level: The logging level associated with this message.
For a description of the various levels, see “logging level” on
page 6-38.
•
Event Message: The content of the log message.
CLI Commands for Displaying the Event Logs – From the global
configuration mode, use the
show logging
command.
AP#show loggging
7-27
Logging Information
============================================
Syslog State : Enabled
Logging Host State : Enabled
Logging Console State : Enabled
Server Domain name/IP : 192.168.1.19
Logging Level : Alert
Logging Facility Type : 16
=============================================
AP#
Summary of Contents for 2888W-M
