![background image](http://html.mh-extra.com/html/smc-networks/2888w-m/2888w-m_owners-manual_1300139297.webp)
A-1
Appendix A
Troubleshooting
Check the following items before you contact local Technical
Support.
1.
If wireless bridge units do not associate with each other,
check the following:
•
Check the power injector LED for each bridge unit to be
sure that power is being supplied
•
Be sure that antennas in the link are properly aligned.
•
Be sure that channel settings match on all bridges
•
If encryption is enabled, ensure that all bridge links are
configured with the same encryption keys.
2.
If you experience poor performance (high packet loss rate)
over the wireless bridge link:
•
Check that the range of the link is within the limits for the
antennas used.
•
Be sure that antennas in the link are properly aligned.
•
Check that there is an unobstructed radio line-of-sight
between the antennas.
•
Be sure there is no interference from other radio sources.
Try setting the bridge link to another radio channel.
•
Be sure there is no other radio transmitter too close to
either antenna. If necessary, move the antennas to
another location.
Summary of Contents for 2888W-M
