Wireless Interface Commands
7-121
Example
show station
This command shows the wireless clients associated with the
access point.
Command Mode
Exec
AP#show interface wireless a
Wireless Interface Information
=========================================================
----------------Identification-----------------------------
Description : Enterprise 802.11a Wireless
Outdoor Bridge/AP
Service Type : WDS Bridge
SSID : DualBandOutdoor
Turbo Mode : OFF
Channel : 36
Status : Enable
----------------802.11 Parameters--------------------------
Transmit Power : FULL (15 dBm)
Max Station Data Rate : 54Mbps
Fragmentation Threshold : 2346 bytes
RTS Threshold : 2347 bytes
Beacon Interval : 100 TUs
DTIM Interval : 2 beacons
Maximum Association : 64 stations
----------------Security-----------------------------------
Encryption : 128-BIT AES ENCRYPTION
AES Key type : Alphanumeric
=========================================================
AP#
Summary of Contents for 2888W-M
