![background image](http://html.mh-extra.com/html/smc-networks/2888w-m/2888w-m_owners-manual_1300139207.webp)
SNMP Commands
7-37
snmp-server host
This command specifies the recipient of an SNMP notification.
Use the
no
form to remove the specified host.
Syntax
snmp-server host
<
host_ip_address
|
host_name
>
<community-string>
no snmp-server host
•
host_ip_address
- IP of the host (the targeted recipient).
•
host_name -
Name of the host. (Range: 1-20 characters)
•
community-string
- Password-like community string sent
with the notification operation. Although you can set this
string using the
snmp-server host
command by itself, we
recommend that you define this string using the
snmp-server community
command prior to using the
snmp-server host
command. (Maximum length: 23
characters)
Default Setting
Host Address: None
Community String: public
Command Mode
Global Configuration
Command Usage
The
snmp-server host
command is used in conjunction with
the
snmp-server enable server
command to enable SNMP
notifications.
Summary of Contents for 2888W-M
