![background image](http://html.mh-extra.com/html/smc-networks/2888w-m/2888w-m_owners-manual_1300139263.webp)
Ethernet Interface Commands
7-93
Related Commands
show interface ethernet (page 7-96)
ip address
This command sets the IP address for the (10/100Base-TX)
Ethernet interface. Use the
no
form to restore the default IP
address.
Syntax
ip address
<
ip-address
> <
netmask
> <
gateway
>
no ip address
•
ip-address
- IP address
•
netmask
- Network mask for the associated IP subnet. This
mask identifies the host address bits used for routing to
specific subnets.
•
gateway
- IP address of the default gateway
Default Setting
IP address: 192.168.2.2
Netmask: 255.255.255.0
Command Mode
Interface Configuration (Ethernet)
Command Usage
• DHCP is enabled by default. To manually configure a new
IP address, you must first disable the DHCP client with the
no ip dhcp
command.
Summary of Contents for 2888W-M
