Bridge Commands
7-75
show bridge
This command displays aging time and spanning tree settings for
the Ethernet and wireless interfaces.
Syntax
show bridge
Command Mode
Exec
Example
AP#
show bridge
Bridge Information
=================================================
Media Type | Age Time(sec)|
=================================================
EtherNet | 300 |
WLAN_A | 1000 |
==================================================
Bridge Id : 32768.037fbef192
Root Bridge Id : 32768.01f47483e2
Root Path Cost : 25
Root Port Id : 0
Bridge Status : Enabled
Bridge Priority : 32768
Bridge Hello Time : 2 Seconds
Bridge Maximum Age : 20 Seconds
Bridge Forward Delay: 15 Seconds
============================= Port Summary
=============================
Id| Priority | Path Cost | Fast Forward | Status |
State |
0 128 25 Enable Enabled
Forwarding
AP#
Summary of Contents for 2888W-M
