![background image](http://html.mh-extra.com/html/smc-networks/2888w-m/2888w-m_owners-manual_1300139250.webp)
Command Line Interface
7-80
show filters
This command shows the filter options and protocol entries in the
filter table.
Command Mode
Exec
Example
PPPoE Commands
The commands described in this section configure PPPoE
management tunnel connection parameters for the Ethernet port.
AP#show filters
Protocol Filter Information
=========================================================
AP Management :ENABLED
Ethernet Type Filter :ENABLED
Enabled Protocol Filters
---------------------------------------------------------
Protocol: ARP ISO: 0x0806
=========================================================
AP#
Command
Function
Mode Page
ip pppoe
Enables PPPoE on the Ethernet
interface
IC-E
7-81
pppoe ip allocation
mode
Specifies how IP addresses for the
PPPoE tunnel are configured on the
interface
IC-E
7-82
pppoe ipcp dns
Negotiates DNS for the PPPoE
tunnel
IC-E
7-83
pppoe lcp
echo-interval
Sets LCP echo interval for the
PPPoE tunnel
IC-E
7-84
Summary of Contents for 2888W-M
