![background image](http://html.mh-extra.com/html/smc-networks/2888w-m/2888w-m_owners-manual_1300139257.webp)
PPPoE Commands
7-87
Default Setting
None
Command Mode
Interface Configuration (Ethernet)
Command Usage
If the
pppoe ip allocation mode
is set to static, the remote IP
address must be entered with this command, and the local IP
address must be entered with the
pppoe local ip
command.
Example
Related Commands
pppoe ip allocation mode (page 7-82)
pppoe local ip (page 7-86)
pppoe username
This command sets the user name for the PPPoE tunnel.
Syntax
pppoe username
<
username>
username
- User name assigned by the service provider.
(Range: 1-63 alphanumeric characters)
Default Setting
None
Command Mode
Interface Configuration (Ethernet)
AP#(if-ethernet)#pppoe remote ip 192.168.1.20
AP#
Summary of Contents for 2888W-M
