![background image](http://html.mh-extra.com/html/smc-networks/2888w-m/2888w-m_owners-manual_1300139282.webp)
Command Line Interface
7-112
key
This command sets the keys used for WEP and AES encryption.
Use the
no
form to delete a configured key.
Syntax
key
{
wep
<
index
size
type
wep
-
value
> |
wdsaes
<
port-id
aes-value
>}
no key
{
wep
<
index
> |
wdsaes
}
•
wep
- The keyword that specifies a WEP encryption key.
–
index
- Key index. (Range: 1-4)
–
size
- Key size. (Options: 64, 128, or 152 bits)
–
type
- Input format. (Options: ASCII, HEX)
–
wep-value
- The WEP key string. For ASCII input, use 5/
13/16 alphanumeric characters for 64/128/152 bit keys.
For HEX input, use 10/26/32 hexadecimal digits for 64/
128/152 bit keys.
•
wdsaes
- The keyword that specifies an AES encryption key
–
port-id
- The ID for the wireless port on the bridge. For
Slave units, the ID is 1. For Master units, the ID can be
from 1 to 16.
–
aes-value
- The AES key string. For alphanumeric input,
use 8 to 31 characters. For hexadecimal input, use exactly
32 digits.
Default Setting
None
Command Mode
Interface Configuration (Wireless)
Command Usage
• To enable WEP encryption, use the
encryption
command
to specify the key type and length, and use the
key
command to configure at least one key.
Summary of Contents for 2888W-M
