![background image](http://html.mh-extra.com/html/smc-networks/2888w-m/2888w-m_owners-manual_1300139206.webp)
Command Line Interface
7-36
Example
Related Commands
snmp-server location (page 7-38)
snmp-server enable server
This command enables SNMP management access and also
enables this device to send SNMP traps (i.e., notifications). Use
the
no
form to disable SNMP service and trap messages.
Syntax
snmp-server enable server
no
snmp-server enable server
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
• This command enables both authentication failure
notifications and link-up-down notifications.
• The
snmp-server host
command specifies the host device
that will receive SNMP notifications.
Example
Related Commands
snmp-server host (page 7-37)
AP(config)#snmp-server contact Paul
AP(config)#
AP(config)#snmp-server enable server
AP(config)#
Summary of Contents for 2888W-M
