CHAPTER 5
MAINTAINING YOUR SMART ROOM SYSTEM
45
smarttech.com/kb/170764
Preventing condensation
The interactive flat panel screen contains layers of glass that can collect condensation, especially
in the following conditions:
l
Temperature extremes with high humidity
l
Rapid changes in humidity, which can occur when you operate the product near water, such as
a sink, pool, kettle or air conditioner ventilator
l
Direct exposure to sunlight
To evaporate condensation from the interactive flat panel
1. Remove the humidity source from the interactive flat panel, if possible.
2. Adjust the room temperature to normal operating ranges.
3. Turn on the interactive flat panel and leave it on for 2–3 hours.
4. If the screen condensation doesn’t evaporate, contact SMART Support
).
Maintaining the camera
CAUTION
Do not directly contact the camera lens, even to clean it. Directly contacting the camera lens can
scratch or otherwise damage it, negatively impacting the camera’s performance.
You need to clean the camera lens only if there is visible accumulation of dust. Use a canister of
inert gas or a blower bulb to blow the dust off of the lens. Don’t blow off dust with your mouth
because this can deposit droplets of saliva on the camera lens.
Maintaining the microphones
Follow these instructions to clean the microphones.
To clean the microphones
1. Turn off the interactive flat panels.
2. Wipe the microphones with a lint-free, non-abrasive cloth.
