APPENDIX A
USING THE ON-SCREEN DISPLAY MENU
70
smarttech.com/kb/170764
Option
Values
Function
Notes (if any)
DDC CI
ENABLE
DISABLE
Enables or disables two-way
communication and control of the
interactive flat panel
SCAN MODE
UNDER SCAN
OVER SCAN
Sets the scanning mode
Some video formats might require
different modes to display the best
image.
FBC CONTROL
ENABLE
DISABLE
Enables or disables the front
control panel
MONITOR ID
1–100
Sets the interactive flat panel’s ID
PROXIMITY CONTROL
PROXIMITY
ENABLE
DISABLE
Enables or disables presence
detection
You can modify this option only if
you select STANDBY in
STANDBY MODE.
RE-ENABLE TIME
1–10
Sets how long the interactive flat
panel waits before detecting
motion again (in minutes)
You can modify this option only if
you select ENABLE in
PROXIMITY.
AUTO POWER OFF
15–240
Sets when the interactive flat panel
automatically turns off (in minutes)
You can modify this option only if
you select ENABLE in
PROXIMITY.
BRIGHTNESS
0–100
Sets the brightness of the welcome
screen
You can modify this option only if
you select ENABLE in
PROXIMITY.
CEC
ENABLE
DISABLE
Enables or disables Consumer
Electronics Control (CEC) support
on HDMI inputs
HEAT STATUS
FAN1
[N/A]
Shows the status of the first fan
This option only provides
information. You’re unable to
modify it.
FAN2
[N/A]
Shows the status of the second fan
This option only provides
information. You’re unable to
modify it.
SENSOR1
[N/A]
Shows the temperature reading
from the first sensor
This option only provides
information. You’re unable to
modify it.
SENSOR2
[N/A]
Shows the temperature reading
from the second sensor
This option only provides
information. You’re unable to
modify it.
FAN CONTROL
COOLING FAN
ON
AUTO
Sets the fan to run continuously
(ON) or only when the sensor
temperature is greater than
optimal sensor temperature
(AUTO)
