CHAPTER 4
USING YOUR SMART ROOM SYSTEM
29
smarttech.com/kb/170764
4. Press the Input Select button
on the front control panel until the input source is HDMI3/PC.
TIP
Alternatively, you can press the INPUT button on the remote control (see
To connect a guest laptop to a SMART Board 8084i-G4 interactive flat panel
1. Connect the USB cable from the interactive flat panel’s USB3 receptacle to the guest laptop.
2. Connect the HDMI cable from the interactive flat panel’s HDMI1 connector to the guest laptop.
3. Turn on the laptop.
4. Press the Input Select button
on the front control panel until the input source is HDMI1.
TIP
Alternatively, you can press the INPUT button on the remote control (see
Changing input sources
You can connect the interactive flat panel to a room computer or a guest laptop (see
You can display a device’s input source by pressing the Input Select button
on the front
control panel until the device’s input appears on the interactive flat panel. Alternatively, you can
press the INPUT button on the remote control.
TIP
The remote control for SMART Board 8070i-G4 interactive flat panels has buttons for each input
source (HDMI1, HDMI2, and so on). Press one of these input source buttons to display the
connected device’s input.
Using the remote control
Each interactive flat panel’s infrared remote control enables you to turn on and turn off the
interactive flat panel, change the input source and more. You can also use the remote control to
open the on-screen display menu and then change the interactive flat panel’s settings.
If the remote control doesn’t respond, see
