CHAPTER 5
MAINTAINING YOUR SMART ROOM SYSTEM
41
smarttech.com/kb/170764
5. Press Calibrate.
The calibration screen appears. This can take a few moments.
NOTES
o
You can press the orientation button
on the color select module to move the
calibration screen to the next interactive flat panel.
o
If you select the incorrect display during calibration or orientation, touch might not
respond.
6. Press the red target with the tip of an interactive flat panel pen. Hold the tip at the center of
the target until the target turns green, and then lift the pen.
The target moves to the next location.
NOTE
You can calibrate a target again by pressing the LEFT ARROW key on your keyboard, or the
Keyboard button or Right-click button on the color select module.
7. Continue pressing targets until the calibration is complete.
A message appears stating that the calibration was successful, and then the orientation screen
appears.
8. Orient the interactive flat panel (see
Orienting the interactive flat panels
Orienting the interactive flat panels
If the location of your touch is misinterpreted (the pointer appears a distance from the actual
contact), orient the interactive flat panel.
To orient an interactive flat panel
1. Press the Orientation button
on the color select module.
The orientation window opens.
2. Use an interactive flat panel pen to press the red targets as they appear. Hold the tip of the
pen at the center of each target, and then lift the pen. When you lift the pen, the target moves
to the next orientation point.
IMPORTANT
Hold the pen perpendicular to the screen.
3. Continue until you’ve pressed all the targets.
The orientation window closes.
