CHAPTER 5
MAINTAINING YOUR SMART ROOM SYSTEM
40
smarttech.com/kb/170764
Maintaining the interactive flat panels
Complete the following tasks as needed to maintain your SMART Room System’s interactive flat
panels:
l
Calibrate and orient the interactive flat panels
l
Replace batteries in the remote control
l
Replace pen nibs
l
Clean the screen
l
Clean the presence detection sensors
l
Clean the DViT camera windows and reflective tape
l
Maintain ventilation
l
Prevent condensation
Calibrating the interactive flat panels
DViT cameras in the corners of the interactive flat panel track the position of the pens, eraser and
your finger on the interactive surface, and then send the information to the SMART software, which
interprets this information as mouse clicks, digital ink or ink removal in the appropriate location.
Calibration determines the position and angles of the DViT cameras to accurately identify the
location of touches on the interactive flat panel.
IMPORTANT
If an error message appears while you are calibrating the interactive flat panel, contact
SMART Support (
).
To calibrate an interactive flat panel
1. Open SMART Settings (see
2. Press SMART Hardware Settings.
3. Select the interactive flat panel you want to calibrate.
TIP
If you don’t know which interactive flat panel listed in SMART Settings is the one you want to
calibrate, press the interactive flat panel’s surface with your finger. The blue dot to the right
of the interactive flat panel’s name in SMART Settings changes color to blue.
4. Select Advanced Settings from the drop-down list.
