CHAPTER 2
INSTALLING YOUR SMART ROOM SYSTEM
19
smarttech.com/kb/170764
5. Right-click Echo Canceling Speakerphone, and then select Set as Default Communication
Device.
6. Press Recording.
7. Right-click Echo Canceling Speakerphone, and then select Set as Default Device.
8. Right-click Echo Canceling Speakerphone, and then select Set as Default Communication
Device.
9. Press OK.
10. Close Control Panel.
Connecting cables for laptops
You can install cables that enable users to connect laptops to one of the interactive flat panels
from another location in the room, such as on the meeting room table.
By installing these cables, you make use of connectors that might not be accessible when the
interactive flat panels are mounted. You can then run the cables across floors or behind walls to the
meeting room table.
WARNING
Ensure that any cables extending across the floor to your SMART product are properly bundled
and marked to avoid a trip hazard.
NOTE
The SMART Room System’s audio features aren’t available to laptops because there is no cable
connecting laptops to the audio processor.
To connect cables for laptops to a SMART Board 8070i-G4
interactive flat panel
1. Purchase an I/O extension module (Part No. SBID-G4-XTM) and
install it in one of the interactive flat panels.
2. Connect a USB cable to the USB1 receptacle on the I/O
extension module.
3. Connect an HDMI cable to the HDMI3/PC connector on the I/O
extension module.
