SMART SRS-MP-170 Setup And Maintenance Manual Download Page 28

Page: 28 / 114

CHAPTER 3
SETTING UP YOUR SMART ROOM SYSTEM

smarttech.com/kb/170764

Installing software

To take full advantage of your SMART Room System’s features, you must download and install

SMART Meeting Pro software on your room computer and SMART Meeting Pro PE software on any

other computers, including laptops.

NOTE

If your organization has purchased Bridgit server software, you also need to download and install

it for users to use Bridgit software that comes with SMART Meeting Pro software and

SMART Meeting Pro PE software. For more information, see

Installation instructions

on page 11.

Downloading and installing software

To download and install SMART Meeting Pro software on the room computer

1. Go to

smarttech.com/downloads

2. Scroll to the

SMART Meeting Pro software

section.

3. Click Choose a version, and then select the most recent version.

4. Click Download.

5. Follow the on-screen instructions to save the installer to a temporary location.

6. Double-click the installer.

7. Follow the on-screen instructions to install SMART Meeting Pro software.

8. Configure SMART Meeting Pro software following the instructions in the Help (see

Help

page 12).

To download and install SMART Meeting Pro PE software on other computers

1. Go to

smarttech.com/downloads

2. Scroll to the

SMART Meeting Pro PE software

section.

3. Click Choose a version, and then select the most recent version.

4. Click Download.

5. Follow the on-screen instructions to save the installer to a temporary location.

6. Double-click the installer.

7. Follow the on-screen instructions to install SMART Meeting Pro PE software.

Summary of Contents for SRS-MP-170



















































































































Search results

Summary of Contents for SRS-MP-170

Reviews:

Related manuals for SRS-MP-170

Brands by name

Popular brands

SMART SRS-MP-170, Setup And Maintenance Manual

Search results

Summary of Contents for SRS-MP-170

Reviews:

Related manuals for SRS-MP-170

Brands by name

Popular brands