CHAPTER 5
MAINTAINING YOUR SMART ROOM SYSTEM
42
smarttech.com/kb/170764
4. If this doesn’t correct inaccurate touch, calibrate the interactive flat panel (see
Replacing batteries in the remote controls
Each remote control requires two 1.5V AAA batteries.
WARNING
To reduce the risk associated with leaking batteries:
l
use only AAA type batteries
l
do not mix used and new batteries
l
orient the battery’s plus (+) and minus (-) terminals according to the markings found on the
remote control
l
do not leave the batteries in the remote control for an extended period
l
do not heat, disassemble, short or recharge the batteries, or expose them to fire or high
temperature
l
avoid eye and skin contact if batteries have leaked
l
dispose of exhausted batteries and product components in accordance with applicable
regulations
To replace batteries in a remote control
1. Press the tab on the underside of the remote control, and then open the cover.
2. Remove the existing batteries.
3. Insert two new 1.5V AAA batteries in the remote control.
4. Replace the cover.
Replacing a pen nib
To prevent damage to the interactive flat panel’s anti-glare coating, replace your pen nib if it
becomes worn. Four replacement pen nibs are included with the pens, and you can purchase
additional replacements from the Store for SMART Parts (see
smarttech.com/Support/PartsStore
).
To replace a pen nib
1. Grasp the worn nib on the pen with a pair of pliers, and then pull and twist the nib loose.
2. Press the replacement nib into the pen.
