SMART SRS-MP-170, Setup And Maintenance Manual

Page: 34 / 114

CHAPTER 4
USING YOUR SMART ROOM SYSTEM
28 smarttech.com/kb/170764
Using your SMART Room System with the
room computer
Users will most often use the interactive flat panels with the room computer you set up in the
previous chapter (see Setting up your SMART Room System on page 21).
SMART Meeting Pro software installed on the room computer enables users to do the following:
l
Interact with objects on the screen by touching them
l
Write, draw and erase digital ink
l
Use multitouch gestures to browse pages, zoom in and out, and resize, rotate, group, ungroup
and flick objects
l
Create and participate in collaborative meetings
For more information on the software and how you can use it with your SMART Room System, refer
to the Help (see
Help
on page 12).
Connecting a guest laptop
Users can connect a guest laptop to one of the interactive flat panels in your SMART Room System
using the cables you installed (see Connecting cables for laptops on page 19).
When a user connects a guest laptop to an interactive flat panel, the laptop’s desktop is displayed
on the interactive flat panel and touch interactivity is enabled if SMART Meeting Pro PE software is
installed (see
Installing software
on page 22).
NOTE
The SMART Room System’s audio features aren’t available to laptops because there is no cable
connecting laptops to the audio processor.
To connect a guest laptop to a SMART Board 8070i-G4 interactive flat panel
1. Connect the USB cable from the I/O extension module’s USB1 receptacle to the guest laptop.
2. Connect the HDMI cable from the I/O extension module’s HDMI3/PC connector to the guest
laptop.
3. Turn on the laptop.