SMART SRS-MP-170, Setup And Maintenance Manual

Page: 45 / 114

CHAPTER 5
MAINTAINING YOUR SMART ROOM SYSTEM
39 smarttech.com/kb/170764
CAUTION
l
Only a system administrator should update interactive flat panel firmware.
l
Only one interactive flat panel can be connected to the computer during the firmware
update process.
l
Do not disconnect the interactive flat panel from the computer during the firmware update
process.
l
Do not touch the interactive flat panel’s screen or the Input Select button during the
firmware update process.
l
Do not turn off the computer or the interactive flat panel during the firmware update
process.
To update firmware
1. Ensure there is a USB connection between the interactive flat panel and the room computer
(see
Connecting the interactive flat panels
on page 17).
2. Launch the firmware updater at the following location:
Operating
system Location
Windows (32-bit) C:\Program Files\SMART Technologies\SMART Product Drivers\
SMARTFirmwareUpdater.exe
Windows (64-bit) C:\Program Files (x86)\SMART Technologies\
SMART Product Drivers\SMARTFirmwareUpdater.exe
3. Follow the on-screen instructions using the computer’s mouse and keyboard. Don’t touch the
interactive flat panel screen.
4. Select your interactive flat panel model, and then click Next.
A progress bar appears.
5. When the installation is complete, calibrate the interactive flat panel (see Calibrating the
interactive flat panels on the next page).