CHAPTER 5
MAINTAINING YOUR SMART ROOM SYSTEM
44
smarttech.com/kb/170764
These areas should be inspected regularly for dust and should be cleaned if any obvious dust
buildup has occurred.
CAUTION
l
Do not use compressed air to clean the DViT camera windows or borders.
l
Do not use water, chemicals or cleaning agents.
l
Applying too much pressure when cleaning the tape or DViT cameras can damage the tape
and cause performance issues or errors.
To clean the DViT camera windows and reflective tape
1. With a clean lint-free cloth, gently wipe the DViT camera windows in the top corners and the
reflective tape along the top of the interactive flat panel screen using the cloth.
2. Gently wipe the reflective tape along the sides of the interactive flat panel screen.
3. Gently wipe the DViT camera windows in the bottom corners and the reflective strip across
the bottom of the interactive flat panel screen.
Maintaining ventilation
The interactive flat panels require ventilation to enable the cooling fans to function. Dust buildup in
the ventilation holes compromises cooling and leads to product failure.
l
Clean accessible ventilation holes monthly with a dry cloth.
l
Use a vacuum cleaner with a narrow hose end fitting to clear the back ventilation holes
regularly. You might have to remove the interactive flat panel from your wall. For more
information on removing the interactive flat panel see
Removing your SMART Room System
CAUTION
Avoid setting up or using the interactive flat panel in an area with excessive levels of dust,
humidity or smoke.
