APPENDIX A
USING THE ON-SCREEN DISPLAY MENU
69
smarttech.com/kb/170764
Option
Values
Function
Notes (if any)
OSD TURN OFF
5–240
Sets the time of inactivity before the
on-screen display menu turns off
(in seconds)
OSD H-POSITION
0–100
Sets the horizontal position of the
on-screen display menu
OSD V-POSITION
0–100
Sets the vertical position of the
on-screen display menu
INFORMATION OSD
3–10
OFF
Specifies how long the information
menu displays when a user
changes the video input or presses
the DISPLAY button on the remote
control
MONITOR INFO
MODEL NAME
[N/A]
Shows the interactive flat panel’s
model number
This option only provides
information. You’re unable to
modify it.
SERIAL NUMBER
[N/A]
Shows the interactive flat panel’s
serial number
This option only provides
information. You’re unable to
modify it.
OSD TRANSPARENCY
TYPE1
TYPE2
OFF
Sets the on-screen display menu
transparency
OSD RESET
[N/A]
Resets all options in the
OSD menu
to their default values
SETUP
POWER SAVE
ON
OFF
Enables or disables Power Save
mode
When Power Save mode is enabled
and there isn’t video input, the
interactive flat panel displays
No Signal for 25 seconds before
turning off.
When you connect a DVI video
cable, the video card might not stop
sending digital data even if there is
no image. In this case, the
interactive flat panel doesn’t enter
Power Save mode.
STANDBY MODE
STANDBY
ECO STANDBY
Sets the Standby mode to reduce
power consumption
When ECO Standby mode is
enabled, presence detection is
disabled and you can’t wake the
computer by touching the
interactive flat panel’s screen.
You can’t use remote
management functions in
ECO Standby mode.
