SMART Embedded Computing 6806800V18A, Installation And Use Manual

Page: 86 / 164

84 AXP1440-C07 Installation and Use (6806800V18A)
Site Preparation
Site Preparation
3.3 Dimensions and Weight
The table below lists the dimensions and weight of the shelf and system components.
3.3.1 Mounting Options
You can operate the AXP1440-C07 on your desk or you can install it in a standard 19" rack.
When installing additional blades or modules, make sure that the power
consumption of all installed modules does not exceed the system's maximum power
dissipation.
Table 3-4 Dimensions and Weight of Shelf and Components
Component
Dimensions
w x h x d Weight
(approximate)
Shelf (base integrated platform)
Base platform: two PEMS, two SAMS,
backplane, upper and lower fan trays, ADP
board, and riser board. No payload blades.
483 x 599 x 527mm
(19.05 x 23.60 x 20.75
inches)
49.4 kg
(109 lbs)
PEM
164 x 73 x 155mm
(6.5 x 2.9 x 6.1 inches) 1.7 kg
(3.8 lbs)
Upper Fan Tray Module
491 x 87 x 227mm
(19.3 x 3.4 x 8.9 inches) 4.1 kg
(9.1 lbs)
Lower Fan Tray Module
491 x 119 x 331mm
(19.3 x 4.7 x 13 inches) 6.2 kg
(13.7 lbs)
ATCA-F140-D
30 x 351 x 328mm
(1.2 x 13.8 x 12.9 inches) 2.9 kg
(6.3 lbs)
RTM-ATCA-F140-D
30 x 351 x 120mm
(1.2 x 13.8 x 4.7 inches) 0.8 kg
(1.7 lbs)
The AXP1440-C07 has additional rail mounting capability. The top and bottom plates
are compatible with the rail systems of Jonathon Company. See
Figure 5-3 on page
99
. For hole spacing and configuration, please contact your local SMART EC sales
representative.