SMART Embedded Computing 6806800V18A, Installation And Use Manual

Page: 125 / 164

FRU Installation
AXP1440-C07 Installation and Use (6806800V18A) 123
9. Remove the alignment tool from its stowed position, by loosening the four
thumbscrews. The retaining cable can remain attached to the tool.
10. Position the alignment tool over slot 6 or 9, so that the
UP
is facing up.
11. Securely fasten the thumb screws.
12. Use a #1 Phillips screwdriver through the alignment hole in the tool and fasten the
internal captive screw. Torque to 0.3 N-m/2.65 in-lbs.
13. After the internal captive screw has been fastened, return the alignment tool to its
stowed position with the
UP
facing to the left.
14. Connect cables to the face plate, if applicable.
15. After the blade is installed make sure that a boot image is present on the on the blade’s
hard disk.
Alignment Tool in Slot 9 Position Alignment Tool in Slot 6 Position