SMART Embedded Computing 6806800V18A, Installation And Use Manual

Page: 79 / 164

AXP1440-C07 Shelf Description
AXP1440-C07 Installation and Use (6806800V18A) 77
2.11 Stationary Components
There are some components in the shelf which are completely passive and are not field
replaceable:

Backplane

Upper fan interconnect board, provides power and signaling from the backplane to
the distribution board

Distribution board, provides the signal and power connections to the upper fan tray
modules from the backplane
2.12 Standard Compliances
The AXP1440-C07 AdvancedTCA platform complies with the safety and regulatory
standards as shipped from the factory. It is possible to use this product with other
components that produce a system not in compliance with system guidelines. Since
SMART EC cannot anticipate what equipment may be used with this enclosure or how it
may be used, the responsibility for designing a system that conforms overall to the safety
requirements, EMI/RFI emission limits, and other applicable standards rests entirely with
the system integrator and installer.
Table 2-9 PEM LED Status Indicators
Power LED Color State/Condition
In Service Green
Off: No service
Blink: PEM activating
Glow Steady: Service available
Out of Service (OOS) Red
Off: Service available
Blink: Deactivation requested
Glow Steady: No service
Hot Swap (HS) Blue
Off: PEM is not ready to be removed
Blink: Deactivation requested
Glow Steady: PEM is ready to remove