Sirona Dental Systems GmbH
Gebrauchsanweisung und Installation
5 Operation
64 08 137 D3610
D3610.201.02.09.02 11.2017
99
5.11
Resend non-transmitted WiFi exposures to
SIDEXIS XG / SIDEXIS 4
Auto recovery
The WiFi interface tries to recover the network connection over an
interval of 2 minutes if the WiFi signal strength is not sufficient for the
data transmission. It may not be turned off during this time and the
sensor may not be removed or else the image will be lost!
Case 1: The network connection is searched for 2 minutes and is
recovered within this time. The data are now sent automatically. The
image is displayed in SIDEXIS XG / SIDEXIS 4.
Case 2: The network connection is searched for 2 minutes and is not
recovered within this time. The exposure readiness dialog closes and
the following error message appears:
Once the network connection is recovered the WiFi interface switches
to the "Ready for exposure" mode. LED is lit up from dimmed to bright
("breathing"). The existing exposure can be transmitted to SIDEXIS
XG / SIDEXIS 4 if the next exposure readiness is created, see the
following.
Rescue
During the course of normal acquisition with XIOS XG, the exposures
are transferred to SIDEXIS XG / SIDEXIS 4 immediately after
acquisition.
If an error occurs while an exposure is being transferred to SIDEXIS
XG / SIDEXIS 4, the exposure will still be backed up locally in a buffer
store. The following dialog window is shown when creating the
exposure readiness the next time:
Summary of Contents for XIOS XG Select
Page 119: ......
