4 Installation
Sirona Dental Systems GmbH
Gebrauchsanweisung und Installation
38
64 08 137 D3610
D3610.201.02.09.02 11.2017
➢ Plug the WiFi interface into the charger.
Ä
After about 15 seconds, the LED at the WiFi interface starts to
flash.
Ä
If the WiFi interface was turned off during plugging in, it
automatically turns on and the LED turns violet. Please wait 15
seconds until the boot sequence has completed. The LED will
start to flash once this has happened. The flashing color shows
the charging status of the storage battery.
Ä
If you are using the WiFi interface for the first time and the LED
is displaying a low charge state (orange to red color range) then
the WiFi interface storage battery must be charged. The
charging time is up to two hours for a complete charge.
However, you can still continue the configuration.
Ä
USB connection is established between the WiFi interface and PC.
Connect the WiFi interface with a visible wireless network
If your wireless practice network is plugged in, please also follow the
instructions in the section "Connect the WiFi interface with a visible
wireless network", see below.
1.
Start the
"WiFi Configuration Utility" configuration program.
For SIDEXIS XG: Click
"Start" > "Programs" > "SIDEXIS" >
"SIDEXIS Manager" > "XIOS XG Configuration" > "Device settings"
tab >
"WiFi configuration" button.
For Sidexis 4: Start the
"WiFi Configuration Utility" via the Windows
start menu.
2.
Select your region from the
"WiFi Interface Region Setting" menu.
3.
Select your practice's wireless network from the list and click
"Connect".
Summary of Contents for XIOS XG Select
Page 119: ......
