Sirona Dental Systems GmbH
Gebrauchsanweisung und Installation
5 Operation
64 08 137 D3610
D3610.201.02.09.02 11.2017
97
5.9.2
With Aimright reusable sensor holder system
NOTICE
The sensor cable is sensitive to mechanical influences.
The cable may become damaged or may wear out prematurely.
➢ Do not pull on the sensor cable when pulling the sensor out of the
hygienic protective sleeve. Slide the sensor further out of the
hygienic protective sleeve with your thumb as described below.
➢ Avoid bending, creasing or rotating the cable or exposing it to
other strains.
1.
Remove the sensor with the hygienic protective sleeve from the
sensor holder. To do this, open up the sensor holder by pressing
gently on one side as shown in the figure.
2.
Carefully push the sensor out of the narrow part of the hygienic
protective sleeve with two fingers.
3.
Slide the sensor further out of the hygienic protective sleeve.
4.
Hold on to the sensor and remove it from the hygienic protective
sleeve.
Summary of Contents for XIOS XG Select
Page 119: ......
