4 Installation
Sirona Dental Systems GmbH
Gebrauchsanweisung und Installation
48
64 08 137 D3610
D3610.201.02.09.02 11.2017
Ä
The WiFi interfaces are enabled for the PC.
4.
Enable WiFi interfaces at additional SIDEXIS XG / SIDEXIS 4
workstations where necessary.
Ä
The WiFi interfaces are registered in SIDEXIS XG / SIDEXIS 4.
Alternatively, the service engineer can also enable the WiFi interfaces
via the
"Attributes" tab for other "SIDEXIS XG / SIDEXIS 4"
workstations in the network. The service password is required to make
changes to this tab, see
"SIDEXIS XG / SIDEXIS 4" Service Manual.
4.9
Pair WiFi interface with the PC
A WiFi interface can transmit X-ray images to different PCs. Equally
multiple WiFi interfaces can be used for one PC. The WiFi interface
must be paired with a PC in order to determine which WiFi interface
transmits the images to which PC. Only one WiFi interface can be
paired with one PC at the same time.
There are two options for pairing the WiFi interface with the PC when
establishing exposure readiness:
● via a selection list using the serial number of the WiFi interface
(standard option)
● via RFID technology (option)
IMPORTANT
The following applies only to pairing based on the serial number:
The pairing does not apply if an individual WiFi interface is operated
on just one PC. The WiFi interface then needs to be merely registered
as an individual X-ray component in SIDEXIS XG, see Register "WiFi
interface in SIDEXIS XG" [→ 47].
Pairing via RFID technology is also required when the WiFi interface
is operated only on one PC. Pairing occurs here via the RFID reader.
Summary of Contents for XIOS XG Select
Page 119: ......
