Sirona galileos, Service Manual

Page: 292 / 388

61 25 665 D3437
292 D3437
.
076.01.15
.
02 06.2012
9 Repair Sirona Dental Systems GmbH
9.2 Height adjustment motor (M1_4)/spindle Service Manual GALILEOS
Locking the slide ➢ Now move the clamp (A) directly underneath the slide.
ª
The slide is now locked in this position for further repair work.
9.2.1.1.2 Moving the slide without the "height adjustment" service kit, REF.
62 57 518
Moving the slide without the "height adjustment" service kit, REF. 62 57 518
Move the slide
1. Loosen the two screws (C) and remove the cover (D).
2. Loosen the 1st of the two screws (E) on the spindle holder (F).
3. Attach the socket wrench (SW19) to the spindle. Hold it firmly in place
while you unscrew the 2nd of the two screws (E).
CAUTION! If the socket wrench has to be reset, secure the spindle
holder against turning, e.g. by using a screw.
4. Rotate the spindle holder using a socket wrench (SW19) to move the
slide to the required height.
Clockwise rotation of spindle = slide moves up
Counterclockwise rotation of spindle = slide moves down
5. After reaching the desired target position, secure the position again
using the two screws (E).
CAUTION! Before replacing the height adjustment motor, the slide
must be secured in this position.
Locking the slide: GALILEOS
C
C
D
F
E