Sirona galileos, Service Manual

Page: 102 / 388

61 25 665 D3437
102 D3437
.
076.01.15
.
02 06.2012
5 Messages Sirona Dental Systems GmbH
5.5 List of error messages Service Manual GALILEOS
E5 11 09
E7 11 11
E7 11 12 GALILEOS
E7 11 14
E7 11 15 GALILEOS
Error code Description Actions required see
E5 11 09 Internal error in program sequence
of board DX11.
● Acknowledge error and repeat procedure.
If the error occurs repeatedly ...
● Perform a software update (bug fix).
S. [ → 61]
Error code Description Actions required see
E7 11 11 Wrong unit configuration. ● Check the unit configuration by running
service routine S017.2 and reconfigure if
necessary.
S. [ → 252]
Error code Description Actions required see
E7 11 12 Internal error in data management
of board DX11.
If the error occurs after a module has been
replaced ...
● Query
"More details..."
with SiXABCon
and seek advice from the Sirona
Customer Service Center on how to
proceed.
S.
If no module has been replaced ...
● Restart the unit:
1. Switch off the unit.
2. Wait 1 minute.
3. Switch unit on.
4. Repeat procedure
● Check software versions on the info
screen or by running service routine
S008.2, perform software update if
necessary.
S. [ → 238],
S. [ → 61]
If the error occurs repeatedly ...
● Perform a software update (bug fix).
S. [ → 61]
Error code Description Actions required see
E7 11 14 Wrong remote control for this unit.
This error message blocks all unit
functions. To continue to work with
this unit, you must unplug the
remote control and restart the unit.
● Install the correct remote control.
● If necessary, obtain a new remote control
from the manufacturer.
A remote control for another Sirona unit or a
third-party manufacturer unit may have been
connected.
Error code Description Actions required see
E7 11 15 A diaphragm not suitable for the
diaphragm configuration was
detected by the unit.
● Run service routine S017.25 to modify the
diaphragm configuration as appropriate
for the installed diaphragm.
S. [ → 270]