Sierra Wireless Overdrive Pro 3G, User Manual

Page: 84 / 174

76 Settings
●
Firmware Version
— This is the firmware version of the 4G component of the device.
●
MAC Address
— This is the MAC address of the 4G module. Each wireless device has a unique
MAC address (assigned by its manufacturer).
●
Plan Version
— This is the version information of your 4G channel plan, which determines the
frequencies to scan and 4G networks to detect.
The window also has buttons to:
●
Save the information to a text file.
●
Reset the 3G and 4G configuration of the device to default settings (
Reset Device to Factory
Defaults
). (See “Resetting the 3G and 4G Configurations to Default Settings” on page 92.)
Log Panel
1.
Log in to the home page.
2.
Click Advanced Settings ( ).
3.
Click
Device > Log
.
From this window, you can:
●
Enable logging of system events. (See “Enabling and Disabling Logging of System Events” on
page 110.)
●
Export logs. (See “Exporting System Events” on page 110 and “Exporting the Connection History”
on page 109.)
●
Clear logs. (See “Clearing the System Events Log” on page 110 and “Clearing the Connection
History” on page 109.)
●
Enable logging of connects and disconnects. (See “Enabling and Disabling Logging of Connects
and Disconnects” on page 109.)
●
Set the method used for time acquisition. (See “Setting the Method Used for Time Acquisition” on
page 111.)
WAN Tab
Setup Panel
1.
Log in to the home page.
2.
Click
Advanced Settings
( ).
3.
Click WAN > Setup .
Tip: You can view some of the above information on the “About...” LCD information screen. (See “LCD
Information Screens” on page 17.)