manualshive.com logo in svg

Sierra Wireless Overdrive Pro 3G, User Manual

Share
Download
Sierra Wireless Overdrive Pro 3G User Manual Download Page 107

Settings        99

Setti

ngs

If 

DNS Relay

 is set to Disable, the routing hardware rejects DNS requests targeting the internal 

DNS proxy. 

The 

DNS Relay

 field is configurable and displayed only if 

DNS Mode

 is Manual. If 

DNS Mode

 is 

Auto, DNS Relay is enabled by default.

●

DHCP Static IP Assignment List

 — You can assign a permanent IP address to a MAC address, 

and view the static IP assignment list. (See “DHCP Static IP Assignment List” on page 100.)

DHCP

DHCP (Dynamic Host Control Protocol) automatically assigns an IP address to each device on the 
network and manages other network configuration information for devices connected to your 
network. You do not need to manually configure the IP address on each device that’s on your 
network.

The assigned IP addresses are not permanent (as opposed to when using static IP).

Most ISPs (Internet Service Providers) use DHCP.

Normally, you should enable DHCP, in which case you must configure each device on the 
network with one of the following:

●

TCP/IP settings set to “Obtain an IP address automatically.”

●

TCP/IP bound to the Ethernet connection with DHCP.

If DHCP is disabled, you must configure each device on the network with:

●

Fixed (permanent/static) IP address.

●

DNS server addresses (provided by your service provider).

Enabling DHCP

1.

Log in to the home page.

2.

Click 

Advanced Settings > Router > LAN

.

3.

Next to 

DHCP Server

, select 

Enable

.

Configuring DHCP

To configure DHCP settings, DHCP must be enabled (

Advanced Settings > Router > LAN > 

DHCP Server

).

You can set the following DHCP settings in 

Advanced Settings > Router > LAN

:

●

DHCP IP Address Range

 — This is the starting and ending address of the range of IP addresses 

available for the device to dynamically (that is, not permanently) assign to computers 
connected to it.

The start address must be 192.168.0.10 or above.

The ending address must be 192.168.0.50 or below.

●

DHCP Lease Time

 — This is the amount of time, in minutes, a computer can use its assigned IP 

address before it is required to renew the lease. After this time is up, the computer is 
automatically assigned a new dynamic IP address.

Summary of Contents for Overdrive Pro 3G















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands