manualshive.com logo in svg

Sierra Wireless Overdrive Pro 3G, User Manual

Share
Download
Sierra Wireless Overdrive Pro 3G User Manual Download Page 164

156       Index

Data Sent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Data statistics for the current connection 
session . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Data transferred (current session)  . . . . . . . . .45
Data transferred (lifetime)

3G  . . . . . . . . . . . . . . . . . . . . . . . . . 60, 75, 77
4G  . . . . . . . . . . . . . . . . . . . . . . . . . 61, 75, 77

Data transmission rates  . . . . . . . . . . . . . . . . . . . 8
Default gateway  . . . . . . . . . . . . . . . . . . . . . . . .46
Default settings

3G/4G configuration, resetting   . . . . . . . .92
Software, resetting  . . . . . . . . . . . . . . . . .  105

Demilitarized zone

See DMZ.

Denying computers access to your 

network  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88
Destination IP Address   . . . . . . . . . . . . . . . .  105
Device

Account, setting up on  . . . . . . . . . . . . . . .20
Components   . . . . . . . . . . . . . . . . . . . . . . . . 8
Drawing (connectors and buttons)  . . . . . . 9
Information, viewing   . . . . . . . . . . . . .  60, 75
Name (host name)  . . . . . . . . . . . . . . . . . .84
Setting up  . . . . . . . . . . . . . . . . . . . . . . . . . .20
Turning off   . . . . . . . . . . . . . . . . . . . . . . . . .33

Device Activation Required message  . . . .  126
Device driver, installing

Mac  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
TRU-Install (automatic driver 

installation), enabling or disabling  . . . . .26
Windows  . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Device name (host name)

Changing  . . . . . . . . . . . . . . . . . . . . . . . . . .88
Input rules . . . . . . . . . . . . . . . . . . . . . . . . . .89
Linking to SSID   . . . . . . . . . . . . . . . . . . . . .84

Device tab

About panel  . . . . . . . . . . . . . . . . . . . . . . . .75
Basic panel   . . . . . . . . . . . . . . . . . . . . . . . .72
Display panel  . . . . . . . . . . . . . . . . . . . . . . .73
Log panel  . . . . . . . . . . . . . . . . . . . . . . . . . .76
microSD card panel  . . . . . . . . . . . . . . . . .73
Sounds panel   . . . . . . . . . . . . . . . . . . . . . .74

DHCP

Clients, maximum number of  . . . . . . .  100
Description  . . . . . . . . . . . . . . . . . . . . . . . . .99
Enabling  . . . . . . . . . . . . . . . . . . . . . . . . . . .99
Lease time  . . . . . . . . . . . . . . . . . . . . . . . . .99
Start and end address  . . . . . . . . . . . . . . .99

Static IP Assignment List   . . . . . . . . . . .  100

DHCP IP Address Range   . . . . . . . . . . . . 98, 99
DHCP Lease Time  . . . . . . . . . . . . . . . . . . . . .  98
DHCP Server . . . . . . . . . . . . . . . . . . . . . . . . . .  98
DHCP Static IP Assignment List  . . . . . . . . .  100
Dimensions of device   . . . . . . . . . . . . . . . . .  134
Disable Wi-Fi  . . . . . . . . . . . . . . . . . . . . 44, 79, 90
Disconnect button   . . . . . . . . . . . . . . . . . . . . .  50
Display panel of the Device tab  . . . . . . . . . .  73
Displaying

Device information . . . . . . . . . . . . . . . . . .  75
Location information  . . . . . . . . . . . . . . . .  55

Disposal of battery  . . . . . . . . . . . . . . . . . . . .  136
DMZ

Configuring . . . . . . . . . . . . . . . . . . . . . . .  105
DMZ panel of the Router tab  . . . . . . . .  104
Enabling  . . . . . . . . . . . . . . . . . . . . . . . . .  104

DMZ panel of the Router tab  . . . . . . . . . . .  104
DNS Mode . . . . . . . . . . . . . . . . . . . . . . . . 98, 101
DNS of the WAN . . . . . . . . . . . . . . . . . . . . . . .  45
DNS Relay  . . . . . . . . . . . . . . . . . . . . . . . . . . . .  98
Dormant  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  91
Download speeds   . . . . . . . . . . . . . . . . . . . . . . .8
Drawing of hardware  . . . . . . . . . . . . . . . . . . . . .9
Driver, installing

Mac  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  27
TRU-Install (automatic driver 

installation), enabling or disabling   . . . .  26
Windows  . . . . . . . . . . . . . . . . . . . . . . . . . .  27

Drop specification . . . . . . . . . . . . . . . . . . . . .  134
Duration for full charge  . . . . . . . . . . . . . . . .  132
Duration, session  . . . . . . . . . . . . . . . . . . . 45, 77
Dynamic Host Control Protocol

See DHCP.

Dynamic packet filtering (AKA SPI)  . . . . . . .  97

E

Ec/Io  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40, 91
Electrical specifications  . . . . . . . . . . . . . . . .  132
Electronic Serial Number (ESN)

Device > About window  . . . . . . . . . . 60, 75
LCD, displayed on  . . . . . . . . . . . . . . . . . .  17

Electronics-related businesses, search for  .  56
Email server, accessing  . . . . . . . . . . . . . . . .  101
Enable GPS . . . . . . . . . . . . . . . . . . . . . 43, 55, 78
Enable SD Card  . . . . . . . . . . . . . . . . . . . . . . .  51
Encryption protocols supported  . . . . . . . . .  133
End field (port forwarding)   . . . . . . . . . . . . .  102

Summary of Contents for Overdrive Pro 3G















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands