Sierra Wireless Overdrive Pro 3G, User Manual

Page: 83 / 174

Settings 75
Setti
ngs
About Panel
To view information about your device:
1.
Log in to the home page.
2.
Click Advanced Settings ( ).
3.
Click Device > About .
The following information is displayed:
●
Model Number
— This is the manufacturer’s model of your device.
●
Activation Status
— This field reflects whether 3G is activated.
●
Manufacturer
— This is the company that made your device.
●
Activation Date
— This is the date that the 3G modem was first activated.
●
Software Version — This is the firmware version for the routing hardware of the device.
●
Network Operator — This field shows the carrier that your device was activated with.
●
Reconditioned Status — This field indicates whether your device has been returned for service
or repair and reconditioned (if applicable).
●
Wi-Fi Firmware Version
— This is the firmware version for the Wi-Fi access point of the device.
●
Reconditioned Date
— This field indicates the date that your device has been reconditioned (if
applicable).
●
Router PRI Version
— This is the PRI version for the routing hardware of the device. The PRI
(Product Release Instructions) is a file that contains the settings used to configure wireless
products for a particular service provider, customer, or purpose.
●
Total Bytes — This is the amount of data transferred over the 3G network during the lifetime of
the device.
●
MDN
(Mobile Directory Number) — This is a 10-digit phone number.
●
ESN
or
MEID
.
The ESN (Electronic Serial Number) is the unique first-generation serial number assigned to the
3G component of the device.
The MEID (Mobile Equipment Identifier) is the unique second-generation serial number
assigned to the 3G component of the device.
●
PRL Version
— The PRL (Preferred Roaming List) is an account configuration item set by your
service provider. It controls the radio channels and network carrier used by the 3G modem.
●
PRI Version
— This is the PRI version of the 3G component of the device.
●
Firmware Version — This is the firmware version of the 3G component of the device.
●
Total Bytes — This is the amount of data transferred over the 4G network during the lifetime of
the device.
Note: 4G information is not available if
WAN mode
is “3G only.” (
WAN mode
is in
Advanced
Settings > WAN > Setup
.)