Sierra Wireless Overdrive Pro 3G User Manual Download

Page: 138 / 174

130 Resources

For best results, minimize the number of obstructions between your device and the GPS satellites.

GPS Fix Not Available

Make sure you have a clear view of the sky; if you’re in a forested area, or in or near tall buildings,
move to another location.

To retry a fix, click

Retry Now

. Otherwise, click

Cancel

Cannot Check for Updates

Make sure your device is connected to the AC charger or computer through the micro-USB cable.

Sounds Are Enabled, but the Device Doesn’t Generate Any Sounds

Check that sounds are not turned off through the mute switch on the device. (See “Mute Switch” on
page 17.)

Note:

If you’ll be using USB for data transfer (and not just for charging the device), you must install the
device driver. (See “Making a Tethered Connection” on page 27.)

Summary of Contents for Overdrive Pro 3G















































































































































































Search results

Summary of Contents for Overdrive Pro 3G

Reviews:

Related manuals for Overdrive Pro 3G

Brands by name

Popular brands

Sierra Wireless Overdrive Pro 3G, User Manual

Search results

Summary of Contents for Overdrive Pro 3G

Reviews:

Related manuals for Overdrive Pro 3G

Brands by name

Popular brands