manualshive.com logo in svg

Siemens TC63, Command Set, Page: 457 / 501

Share
Download
Siemens TC63 Command Set Download Page 457

TC63 AT Command Set  

20. Miscellaneous Commands 

s

TC63_ATC_V00.490

Page 457 of 501

5/24/05

Confidential / Draft - Do not copy

 

20.

Miscellaneous Commands

The AT Commands described in this chapter are related to various areas. 

20.1

A/ Repeat previous command line

Syntax

Command Description

Repeat previous command line. 

Notes

• Line does not need to end with terminating character. 
• After beginning with the character "a" or "A" a second character "t", "T" or "/" has to follow. In case of using a

wrong second character, it is necessary to start again with character "a" or "A". 

• If autobauding is active, the command 

A/

 cannot be used (see 

AT+IPR

). 

Exec Command

A/

Response(s)

Reference(s)

PIN

ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge

4

Last

V.250

!

%

%

%

%

%

%

!

%

!

Summary of Contents for TC63






















































































































































































































































































































































































































































































































Reviews:

No comments