Siemens TC63 Command Set Download Page 29

Page: 29 / 501

TC63 AT Command Set

1.9 Errors and Messages

TC63_ATC_V00.490

Page 29 of 501

5/24/05

Confidential / Draft - Do not copy

1.9

Errors and Messages

The command result codes "+CME ERROR:

<err>

" and "+CMS ERROR:

<err>

" indicate errors related to mobile

equipment or network functionality.

The format of

<err>

can be either numeric or verbose and is selectable via

AT+CMEE

A result error code terminates the execution of the command and prevents the execution of all remaining com-

mands that may follow on the same command line. If so, neither "ERROR" nor "OK" result codes are returned

for these commands. A 30 seconds timeout will deliver "ERROR" when the input of a command is not complete.

Using the wrong command syntax may result in errors: For example, using the execute command syntax

although the command has no execute format, causes "ERROR" to be returned. Likewise, using the write com-

mand syntax although the command has no write format causes "+CME ERROR:

<err>

" to be returned.

Summary of Contents for TC63






















































































































































































































































































































































































































































































































Search results

Summary of Contents for TC63

Reviews:

Siemens TC63, Command Set, Page: 29 / 501

Search results

Summary of Contents for TC63

Reviews: