Siemens TC63 Command Set Download Page 414

Page: 414 / 501

TC63 AT Command Set

18.5 AT+CMUT

TC63_ATC_V00.490

Page 414 of 501

5/24/05

Confidential / Draft - Do not copy

18.5

AT+CMUT Mute control

The

AT+CMUT

command mutes the microphone input. The command can be used in all audio modes (1 to 6) and

during a voice call only. See

AT^SNFS

for more details on the various audio modes. As alternative, you can use

the

AT^SNFM

command.

During an active call, users should be aware that when they switch back and forth between different audio modes

(for example handsfree on/off) the value of

<mute>

does not change, i.e. the microphone mode is retained until

explicitly changed.

Syntax

Parameter Description

(P)

Mute off

Mute on

Test Command

AT+CMUT=?

Response(s)

+CMUT:

(list of supported

<mute>

Read Command

AT+CMUT?

Response(s)

+CMUT:

<mute>

ERROR

+CME ERROR: <err>

Write Command

AT+CMUT=

<mute>

Response(s)

ERROR

+CME ERROR: <err>

Reference(s)

ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge

Last

GSM 07.07

<mute>

(num)

Summary of Contents for TC63






















































































































































































































































































































































































































































































































Search results

Summary of Contents for TC63

Reviews:

Siemens TC63, Command Set, Page: 414 / 501

Search results

Summary of Contents for TC63

Reviews: