Siemens TC63 Command Set Download Page 211

Page: 211 / 501

TC63 AT Command Set

9.4 AT+CAOC

TC63_ATC_V00.490

Page 211 of 501

5/24/05

Confidential / Draft - Do not copy

9.4

AT+CAOC Advice of Charge information

Syntax

Command Description

Execute command returns the current call meter value.
The write command sets the Advice of Charge supplementary service function mode.

Parameter Description

query CCM value

Three bytes of the current CCM value in hexadecimal format (e.g. "00001E" indicates decimal value 30); bytes

are similarly coded as ACMmax value in the SIM 000000-FFFFFF.

Test Command

AT+CAOC=?

Response(s)

+CAOC:

(list of supported

<mode>

Read Command

AT+CAOC?

Response(s)

+CAOC:

<mode>

Exec Command

AT+CAOC

Response(s)

ERROR

+CME ERROR: <err>

<mode>

=0, TA returns the current call meter value:

+CAOC:

<ccm>

Write Command

AT+CAOC=

[

<mode>

]

Response(s)

ERROR

+CME ERROR: <err>

<mode>

=0, TA returns the current call meter value.

Reference(s)

ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge

Last

GSM 07.07

<mode>

(num)(&V)

<ccm>

(str)

Summary of Contents for TC63






















































































































































































































































































































































































































































































































Search results

Summary of Contents for TC63

Reviews:

Siemens TC63, Command Set, Page: 211 / 501

Search results

Summary of Contents for TC63

Reviews: