Siemens TC63 Command Set Download Page 318

Page: 318 / 501

TC63 AT Command Set

12.8 AT+FTS

TC63_ATC_V00.490

Page 318 of 501

5/24/05

Confidential / Draft - Do not copy

12.8

AT+FTS Stop Transmission and Wait

Syntax

Command Description

This command causes the TA to terminate a transmission and wait for

<time>

10 millisecond intervals before

responding with the OK result code to the DTE.

Parameter Description

no. of 10 millisecond intervals
0...85

Note

• Used for Fax Class 1 only

Write Command

AT+FTS=

<time>

Response(s)

An ERROR response code results if this command is issued while the modem is on-
hook.

Reference(s)

ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge

Last

TIA/EIA-578

<time>

(num)

Summary of Contents for TC63






















































































































































































































































































































































































































































































































Search results

Summary of Contents for TC63

Reviews:

Siemens TC63, Command Set, Page: 318 / 501

Search results

Summary of Contents for TC63

Reviews: