manualshive.com logo in svg

Siemens TC63, Command Set, Page: 123 / 501

Share
Download
Siemens TC63 Command Set Download Page 123

TC63 AT Command Set  

5.5 AT^SLCK

s

TC63_ATC_V00.490

Page 123 of 501

5/24/05

Confidential / Draft - Do not copy

 

5.5

AT^SLCK Facility lock

AT^SLCK

 provides the "Facility lock" function as defined for the GSM 07.07 command 

AT+CLCK

. The command

can be used to lock, unlock or interrogate a network or ME 

<facility>

.

AT^SLCK

 is, in every respect, identical with 

AT+CLCK

, except that the command syntax and response prefix is

"^SLCK" instead of "+CLCK". For further details please refer to 

AT+CLCK

.

The command can be aborted when network facilities are being set or interrogated. 

Syntax

Note

• In the airplane mode the write command version for the network related 

<facility>

 (AO, OI, OX, AI, IR,

AB, AG and AC) is not supported. For remaining facilities the command is fully functional then. 

Test Command

AT^SLCK=?

Response(s)

^SLCK:

list of supported 

<facility>

s 

OK

Write Command

AT^SLCK=

<facility>

, 

<mode>

[, 

<password>

][, 

<class>

]

Response(s)

if 

<mode>

 is not equal 2 and command successful: 

OK

if 

<mode>

= 2 and command successful: 

^SLCK: 

<status>

, 

<class>

[

^SLCK: 

<status>

, 

<class>

]

[

^SLCK: 

...]

OK

If error is related to ME functionality 

+CME ERROR

Reference(s)

PIN

ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge

4

Last

SIEMENS, GSM 07.07, GSM 02.04, 

GSM 02.88, GSM 03.88, GSM 04.88

%

%

%

%

%

%

%

!

§

!

Summary of Contents for TC63






















































































































































































































































































































































































































































































































Reviews:

No comments