manualshive.com logo in svg

Siemens TC63, Command Set, Page: 288 / 501

Share
Download
Siemens TC63 Command Set Download Page 288

TC63 AT Command Set  

11.10 AT+CGQMIN

s

TC63_ATC_V00.490

Page 288 of 501

5/24/05

Confidential / Draft - Do not copy

 

11.10

AT+CGQMIN Quality of Service Profile (Minimum acceptable)

Syntax

Command Description

The test command returns values supported as a compound value. If the MT supports several PDP types, the

parameter value ranges for each PDP type are returned on a separate line. 
The read command returns the current settings for each defined context. 
This command allows the TE to specify a minimum acceptable profile which is checked by the MT against the

negotiated profile returned in the Activate PDP Context Accept message.

The set command specifies a profile for the context identified by the (local) context identification parameter,

<cid>

.

A special form of the set command, 

AT+CGQMIN

= 

<cid>

 causes the minimum acceptable profile for context

number 

<cid>

 to become undefined. In this case no check is made against the negotiated profile. 

AT&F

 and 

ATZ

 will undefine the minimum QoS profiles of every context which is not active or not online. 

Parameter Description

Parameter specifies a particular PDP context definition. The parameter is local to the TE-MT interface and is

used in other PDP context-related commands. 
1...2

Test Command

AT+CGQMIN=?

Response(s)

+CGQMIN: 

<PDP_type>

, (list of supported 

<precedence>

s), (list of supported 

<delay>

s), (list of 

supported 

<reliability>

s), (list of supported 

<peak>

s), (list of supported 

<mean>

s)

OK

ERROR

+CME ERROR

Read Command

AT+CGQMIN?

Response(s)

[

+CGQMIN: 

<cid>

, 

<precedence>

, 

<delay>

, 

<reliability>

, 

<peak>

, 

<mean>

]

[

+CGQMIN: 

...]

OK

ERROR

+CME ERROR

Write Command

AT+CGQMIN=

[

<cid>

[, 

<precedence>

[, 

<delay>

[, 

<reliability>

[, 

<peak>

[, 

<mean>

]]]]]]

Response(s)

OK

ERROR

+CME ERROR

Reference(s)

PIN

ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge

4

Last

GSM 07.07

%

%

%

%

%

%

%

!

%

!

<cid>

(num)

Summary of Contents for TC63






















































































































































































































































































































































































































































































































Reviews:

No comments