Siemens TC63 Command Set Download Page 187

Page: 187 / 501

TC63 AT Command Set

8.5 AT+CSQ

TC63_ATC_V00.490

Page 187 of 501

5/24/05

Confidential / Draft - Do not copy

8.5

AT+CSQ Signal quality

The

AT+CSQ

execute command indicates the received signal strength

<rssi>

and the channel bit error rate

<ber>

Syntax

Parameter Description

-113 dBm or less

-111 dBm

2..30

-109... -53 dBm

-51 dBm or greater

not known or not detectable

0..7

as RXQUAL values in the table in GSM 05.08 section 8.2.4.

not known or not detectable

Note

• After using network related commands such as

AT+CCWA

AT+CCFC

AT+CLCK

, users are advised to wait 3s

before entering

AT+CSQ

. This is recommended to be sure that any network access required for the preceding

command has finished.

Test Command

AT+CSQ=?

Response(s)

+CSQ:

(list of supported

<rssi>

s), (list of supported

<ber>

Exec Command

AT+CSQ

Response(s)

+CSQ:

<rssi>

<ber>

Reference(s)

ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge

Last

GSM 07.07

<rssi>

(num)

<ber>

(num)

Summary of Contents for TC63






















































































































































































































































































































































































































































































































Search results

Summary of Contents for TC63

Reviews:

Siemens TC63, Command Set, Page: 187 / 501

Search results

Summary of Contents for TC63

Reviews: