manualshive.com logo in svg

Siemens TC63, Command Set, Page: 418 / 501

Share
Download
Siemens TC63 Command Set Download Page 418

TC63 AT Command Set  

18.8 AT^SAIC

s

TC63_ATC_V00.490

Page 418 of 501

5/24/05

Confidential / Draft - Do not copy

 

Notes

• The factory defaults of 

AT^SAIC

 vary with the selected audio mode.

If 

AT^SNFS

=1 or 4 or 5, then 

AT^SAIC

=2,1,1. 

If 

AT^SNFS

=2 or 3 or 6, then 

AT^SAIC

=2,2,2. 

AT^SNFD

 can be used to reset the factory defaults. 

• For use after restart of the ME, you are advised to store the settings of 

AT^SAIC

 and 

AT^SNFS

 to the audio

profile saved with 

AT^SNFW

. Otherwise, audio mode 1 (

AT^SNFS

=1) and audio interface 2 (

AT^SAIC

=2,1,1)

will be active each time the ME is powered up. 

Summary of Contents for TC63






















































































































































































































































































































































































































































































































Reviews:

No comments