Siemens TC63 Command Set Download Page 31

Page: 31 / 501

TC63 AT Command Set

2.2 AT&V

TC63_ATC_V00.490

Page 31 of 501

5/24/05

Confidential / Draft - Do not copy

2.2

AT&V Display current configuration

AT&V

returns the current parameter setting. The configuration varies depending on whether or not PIN authen-

tication has been done and whether or not Multiplex mode is enabled (see

AT+CMUX

Syntax

Parameter Description

[0]

Profile number

Notes

• The value of \Q (flow control) is also determined by the

AT+IFC

command. In case the value set by

AT+IFC

cannot be represented by a \Q equivalent, \Q255 will be displayed.

• The parameters of

AT^SMGO

can only be displayed after the SMS data from the SIM have been read success-

fully for the first time. Reading starts after successful SIM authentication has been performed, and may take

up to 30 seconds depending on the SIM used. While the read process is in progress, an attempt to read the

parameter will result in empty values.

• The parameter of

AT+CSDH

will only be displayed in SMS text mode, see

AT+CMGF

Exec Command

AT&V

[

<value>

]

Response(s)

ACTIVE PROFILE:

... (see Section

2.2.1

AT&V responses

)

Reference(s)

ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge

Last

V.250

<value>

(num)

Summary of Contents for TC63






















































































































































































































































































































































































































































































































Search results

Summary of Contents for TC63

Reviews:

Siemens TC63, Command Set, Page: 31 / 501

Search results

Summary of Contents for TC63

Reviews: