Siemens TC63 Command Set Download Page 165

Page: 165 / 501

TC63 AT Command Set

7.21 AT+CLCC

TC63_ATC_V00.490

Page 165 of 501

5/24/05

Confidential / Draft - Do not copy

Voice followed by data, voice mode (only in connection with single numbering

scheme

AT+CSNS

)

Alternating voice/data, voice mode (only in connection with single numbering

scheme

AT+CSNS

)

Alternating voice/fax, voice mode (only in connection with single numbering

scheme

AT+CSNS

)

Voice followed by data, data mode (only in connection with single numbering

scheme

AT+CSNS

)

Alternating voice/data, data mode (only in connection with single numbering

scheme

AT+CSNS

)

Alternating voice/fax, fax mode (only in connection with single numbering

scheme

AT+CSNS

)

Unknown

Call is not one of multiparty (conference) call parties

Call is one of multiparty (conference) call parties

Phone number in format specified by

<type>

Type of address octect
145

Dialing string

includes international access code character '+'

129

Otherwise

Alphanumeric representation of

corresponding to the entry found in phonebook; used character set

should be the one selected with command

AT+CSCS

(Select TE Character Set).

The maximum displayed length of

<alpha>

is 16 characters. If

<alpha>

has more than 16 characters, only the

first 15 characters are displayed. To indicate an overflow, a special character will be used as the 16th character.

This is a space if the character set selected with

AT+CSCS

is 'GSM', or 'E400' if the character set is 'UCS2'.

Due to time constraints on the necessary evaluation of the phonebook, this parameter may show a default value

in early call phases (e.g. for

<stat>

= ''dialing'', ''incoming'' or ''alerting''), even if a phonebook entry is present

for the number concerned.

Note

• Teleservices other than voice, data, fax are not fully supported by ME. They are used only in connection with

the handling for

AT+CSNS

, and may therefore occur in parameter

<mode>

for mobile terminated calls.

<mpty>

(num)

(str)

<type>

(num)

<alpha>

(str)(+CSCS)

Summary of Contents for TC63






















































































































































































































































































































































































































































































































Search results

Summary of Contents for TC63

Reviews:

Siemens TC63, Command Set, Page: 165 / 501

Search results

Summary of Contents for TC63

Reviews: