manualshive.com logo in svg

Siemens TC63, Command Set, Page: 130 / 501

Share
Download
Siemens TC63 Command Set Download Page 130

TC63 AT Command Set  

5.8 AT^SCSL

s

TC63_ATC_V00.490

Page 130 of 501

5/24/05

Confidential / Draft - Do not copy

 

5.8

AT^SCSL Customer SIM Lock

AT^SCSL

 is a Siemens defined command especially designed to manage the Customer SIM Lock feature. This

feature allows application manufacturers to lock a mobile to specific operators by activating a Network Person-

alization ("PN"). If the lock is enabled the mobile will accept only SIM cards from the given operators.

The Customer SIM Lock is protected by two different passwords: 
•

<password>

 = Network Personalisation password "CM" defined with 

AT^SPWD

 and necessary for program-

ming the Customer SIM Lock with 

AT^SCSL

. 

•

<PUK>

 = Lock/Unlock Code defined with 

AT^SCSL

 and used to set the Customer SIM Lock with 

AT^SCSL

.

Also used to deactivate a given lock or activate a new one via 

AT+CLCK

 or 

AT^SLCK

. The PUK may be pro-

visioned to the end user.

The 

AT^SCSL

 write command serves to configure a Customer SIM Lock and to query the current settings. 

Syntax

Parameter Description

“PN“

Network Personalisation (= Customer SIM Lock) 

Set or remove a Customer SIM Lock, or list the locks currently activated. 
0

Remove the given Customer SIM Lock from ME.

Required parameters: 

<facility>

="PN", 

<action>

=0, 

<password>

. 

Removing the Customer SIM Lock deletes both the 

<PUK>

 and all 

<data>

, i.e.

the entire list of operators. 

1

Write Customer SIM Lock data to the ME and activate the lock.

Required parameters: 

<facility>

="PN", 

<action>

=1, 

<password>

,

<PUK>

, 

<data>

. 

2

Retrieve the list of operators the ME is currently locked to.

Required parameters: 

<facility>

="PN", 

<action>

=2, 

<password>

. 

Test Command

AT^SCSL=?

Response(s)

OK

Write Command

AT^SCSL=

<facility>

, 

<action>

, 

<password>

[, 

<PUK>

, 

<data>

]

Response(s)

OK

ERROR

CME ERROR

If 

<action>

= 2 and command successful: 

^SCSL: 

<data>

[:

<data>

:

<data>

: ...]

If 

<action>

= 2 and operator list is empty: 

^SCSL: 

Reference(s)

PIN

ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge

4

Last

Siemens

!

%

%

%

%

%

%

!

%

!

<facility>

(str)

<action>

(num)

Summary of Contents for TC63






















































































































































































































































































































































































































































































































Reviews:

No comments